金属薄板双面压花机
● 主要适用于：铝板、彩钢板、不锈钢板、车库门业、冰柜冷库、建筑装璜等有色金属薄板压花。
● 花纹为凹凸对压、压花深浅为丝杆式调节。
● 辊材选用45#、40Cr、60CrMnMo、42CrMo、9Cr2M合金钢。
● 辊材锻件实心体调质，热处理HRC55-62。
● 辊对辊采用精密无间隙齿轮传动，精度极高。
● 适于0.04-0.60*1300mm薄形卷材、片材。
● 放卷机、收卷机为气缸移动顶盘式或涨缩圆筒式。

● It is mainly applied in embossing of non ferrous metal thin boards, such as aluminum board, color steel board, stainless steel board, garage door, refrigerator, cold house, constructive and decorative materials, etc.
● The pattern is processed by concave and convex counter pressing, and its depth can be adjusted through the screw.
● Material of roller: alloy steel: 45#、40Cr、60CrMnMo、42CrMo、9Cr2M.
● The solid of forged piece of roller is quenched, tempered and processed by heat treatment HRC55-62.
● The gear drive between rollers is precise and of no clearance.
● It can be applied to thin roll and sheet.
● The winder and unwinder are of cylinder moving top disc type or expansion cylinder type.

金属双面压花机常用规格参数
Specification and parameters of double-surface metal embossing machine

铝箔压花机 Aluminum foil embossing machine

一、实心体辊材压花机
1、外形尺寸（长*宽*高）：3600*110*1500mm
2、重量：约4100kg
3、花辊规格Ø350~380*1350mm
4、辊材42CrMo
5、辊材调质表面热处理HRC55~58
6、电机7.5-11.0KW带调速
7、线速30-35米/分

二、空心体辊材压花机
1、外形尺寸（长*宽*高）：2800*750*1200mm
2、重量：约1300kg
3、花辊规格Ø260~270*1350mm
4、辊材选用优质厚壁45#，无缝管
5、花辊表面硬铬电镀，增加硬度，耐磨性
6、电机4.0KW
7、线速30米/分

三、铝箔放卷机
1、外形尺寸（长*宽*高）：2700*620*1320mm
2、重量：约1300kg
3、力矩电机：100N.M
4、配有纠偏装置，左右滑轮移动
5、固定卷材为Ø152mm气涨轴

Ⅱ.Hollow roller material embossing machine
1.Outline dimension(L*W*H)
2.Weight: about 1300kg
3.Specification of embossing roller
4.Roller's material: high quality, thick wall, 45#, seamless tube
5.The surface is chromplated to improve the hardness and abrasion resistance
6.Motor: 4.0kw with speed adjustment
7.Linear speed: 30m/m

Ⅲ.Aluminum foil unwinder
1.Outline dimension(L*W*H)
2.Weight: about 1300kg
3.Tension setting, magnetic powder braker
4.Roll fixing: gas expanded shaft or cylinder top disc type
5.Supportable weight of roll

Ⅳ.Aluminum foil winder
1.Outline dimension(L*W*H)
2.Weight: about 1300kg
3.Torque motor
4.Equipped with deviation correction device, left and right pulley slip
5.Roll fixing: gas expanded shaft Ø152mm

1.0-2.0mm防滑钢板压花机  1.0-2.0mm slipping-proof steel board embossing machine

皮革、纸张加热式压纹机 Heating type pattern pressing machine for leather and paper

● 压花宽度：500mm ● 下辊设置为羊毛纸辊 ● 电机2.2KW    特殊规格可按要求定制！ ● Embossing width: 500mm ● The lower roller is wool paper one ● Motor 2.2kw    Special specification can be got on request!
● 压花宽度：800mm ● 加热方式：电加热、油加热 ● 电机2.2KW，线速25米/分 ● 涨力设置磁粉制动 ● 收放卷为气涨轴固定	● Embossing width: 800mm ● Heating method: electric, oil ● Motor 2.2KW, linear speed 25m/m ● Tension setting, magnetic powder brake ● The winding and unwinding is gas  expanded shaft fixing

本厂圆筒涨缩式整套设备试机压花